Specifications - Makita TD090DZ Instruction Manual

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger
3-1. Lamp

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-2:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
Explanation of general view
4-1. Reversing switch lever
6-1. Bit
6-2. Sleeve
7-1. Bit
Model
Machine screw
Standard bolt
High tensile bolt
-1
)
Overall length
Net weight
Rated voltage
) : 92 dB(A)
pA
) : 103 dB(A)
WA
value (tri-axial vector
2
) : 10 m/s
h
2
ENE033-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG102-2
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Impact Driver
Model No./ Type: TD090D
are of series production and
ENG205-1
Conforms to the following European Directives:
sum)
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
ENG901-1
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
000230
3
7-2. Bit-piece
7-3. Sleeve
TD090D
4 mm - 8 mm
5 mm - 14 mm
5 mm - 10 mm
0 - 2,400
0 - 3,000
155 mm
0.92 kg
D.C.10.8 V
Corporation as the
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENH101-12
responsible