Advertisement
Reference to key features
* Password is date code.
Getting started
Follow these basic steps to install this
thermostat, link it with the equipment interface
module (EIM) and wireless accessories and
set installer options.
1
Installing the Equipment Interface
Module (EIM)
2
Installing the thermostat
3
Powering optional RedLINK accessories
4
Performing initial setup
5
Finding your password (Date Code)
• To add or remove RedLINK accessories
• To make changes to Installer Setup
• To perform an Installer Test
• To view Data Logs
69-2739_A.indd 2
Current display. Button pressed in
signifies current display
Mode control buttons. Use to change
settings for Fan or System Heat/Cool.
Menu. Select options to: set schedules,
view equipment status, change IAQ
settings, access installer options*, etc.
Current schedule. Shows desired
temperature and schedule status.
Indoor conditions. Shows indoor
temperature and humidity.
Current date and time.
Current status. Shows system mode
(heat/cool), outdoor temperature and
humidity (with optional outdoor sensor).
USB port. Use USB device to load
settings and dealer information.
Thermostat (back view)
2
1324
Password
(Date Code)
1324
11/1/2012 2:33:24 PM
Advertisement
