Makita DCL501Z Instruction Manual page 8

before it reaches the line, including it
accumulates at one side only.
To dispose of dust, follow the procedure
below.
1. Raise the Cup Release lever to eject the
dust cup assembly.
2
2. Press the button to remove the cover.
Dispose of the dust in the dust cup.
1
2
3. Use the cleaning brush attached to the
dust cup to brush away dust inside the
cup.
4. Move the red lever on the filter cover in
the direction of the arrow to flip the filter
cover open.
1
8
1. Dust Full line
1
1. Cup Release
lever
2. Dust cup
assembly
1
1. Cover
2. button
3. Dust cup
3
1. Cleaning brush
1
1. Red lever
2. Filter cover
2
5. Grasp the knob and spin it around ten
times.
1
6. Close the filter cover.
7. Attach the dust cup to the cover.
1
8. Attach the dust cup assembly to the
appliance body.
Cleaning the filter (thoroughly
cleaning )
Wash out the filter if it gets too dirty, when
suction power drops, or the orange lamp
starts flashing.
Remove the dust cup, filter cover, filter, and
cylindrical filter apart and wash each
separately to clean them. Use plain water or
a neutral detergent solution to wash each
part.
After washing the parts, leave them out to
fully dry and then put them back together.
1. Knob
1. Yellow indicator