Labels & Cosmetics - Grizzly G0623X Owner's Manual

1205
CUTTING
HAZARD!
Disconnect power
and wait for blades
to stop before
opening this guard.
1201 1208
EYE/LUNG INJURY
READ and UNDERSTAND
instruction manual to
HAZARD!
avoid serious injury. If a
Always wear safety
manual is not available,
glasses and a
DO NOT use machine. Go
respirator when
to www.grizzly.com or
using this machine.
call (800) 523-4777.
1211V3 1211V2
Specifications
Motor: 5 HP, 230V, 1-Ph, 60 Hz, 19A Max Width Of Cut: 78-1/2"
Main Blade Arbor Size: 5/8" Max Width Of Cut W/Rip Fence: 33"
Main Blade Arbor Speed: 4000 RPM
Max Depth Of Cut at 90°: 3-1/8"
Main Blade Size: 10" Weight: 533 lbs.
Scoring Blade Arbor Size: 22mm
Date
Scoring Blade Arbor Speed: 8000 RPM
Scoring Blade Size: 3-1/8" (80mm)
Serial #
Max Length Of Cut: 63"
181721
Manufactured for Grizzly in Taiwan
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Never touch moving blade and keep hands out of cutting path.
3. Always wear approved eye protection and respirator.
4. Always use blade guard/spreader for all through cuts; and use riving knife
for all non-through cuts.
5. Only use blades meeting size/speed requirements for this saw.
6. Ensure spreader/riving knife and fence are properly adjusted.
7. Never reach behind or over blade while it is moving.
8. Use a push stick when required and whenever possible.
9. Know what causes "kickback" and how to prevent it.
10. Never remove jammed/cutoff workpiece when blade is moving!
11. Make sure blade is stopped before adjusting height/tilt.
12. Do not perform any operation freehand.
13. Ensure machine is stable and fence is parallel with blade.
14. Disconnect power before changing blades or servicing saw.
15. Plan cuts so that workpieces always remain supported.
16. Do not wear loose clothing, gloves, jewelry, or other items that can get
entangled. Tie back long hair and roll up sleeves.
17. Do not expose to rain or operate in a wet environment.
18. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
REF PART # DESCRIPTION
1201 P0623X1201 READ MANUAL LABEL
1203 P0623X1203 KICKBACK HAZARD LABEL
1204 P0623X1204 DISCONNECT POWER LABEL
1205 P0623X1205 BLADE GUARD DANGER LABEL
1206 P0623X1206 QUALIFIED PERSONNEL LABEL
1207 P0623X1207 ELECTRICITY LABEL
1208 P0623X1208 GLASSES/RESPIRATOR LABEL
1209 P0623X1209 GRIZZLY NAMEPLATE-SMALL
1210V2 P0623X1210V2 MODEL NO. LABEL V2.12.16 (G0623X)
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
Model G0623X/G0623X3 (Mfd. Since 05/22)
Labels & Cosmetics
1203
1218
AMPUTATION
Removing blade
HAZARD!
guard increases
Always keep
risk of injury—it
fingers and
MUST be installed
hands away from
Kickback
when possible.
moving blade.
Hazard!
DO NOT stand
directly in front of or
behind blade path.
1210V2
G0623X
G0623X3
1206
NOTICE
Only qualified personnel may
operate this machine. See
supervisor for training.
1214
1204
If blade guard is A blade splitter or
removed for a riving knife MUST
special cut, some be used with this
other safeguard guard to reduce
MUST be used. risk of kickback!
1215 1216
REF PART #
1210V2 P0623X31210V2 MODEL NO. LABEL V2.12.16 (G0623X3)
1211V3 P0623X1211V3 MACHINE ID CSA V3.12.13 (G0623X)
1211V2 P0623X31211V2 MACHINE ID V2.12.13 (G0623X3)
1212 P0623X1212
1214 P0623X1214
1215 P0623X1215
1216 P0623X1216
1218 P0623X1218
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Disconnect
power before
adjustments,
maintenance, or
service.
1207
1212
1209
DESCRIPTION
BLADE TILT LABEL
BLADE ELEVATION LABEL
TOUCH-UP PAINT, GRIZZLY GREEN
TOUCH-UP PAINT, GRIZZLY PUTTY
BLADE WARNING LABEL
1207
-95-