Table of Contents
Advertisement
G0970
401
G0970 Labels B
(08/01/23)
416
G0970 Labels B
• 1:1 Sizing (Labels are
actual size)
(08/01/23)
• Labels must be made of
oil-resistant material
WARNING!
WARNING!
To reduce risk of death
INJURY HAZARD!
or serious injury, read
manual BEFORE using
Do not open door
machine.
while machine is
To get a new manual,
connected to power
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com.
WARNING!
WARNING!
To reduce risk of death
EYE INJURY
INJURY HAZARD!
or serious injury, read
manual BEFORE using
HAZARD!
Do not open door
machine.
WARNING!
415
while machine is
Always wear safety
To get a new manual,
connected to power
glasses when using
call (800) 523-4777 or
or blade is in motion.
this machine.
go to www.grizzly.com.
UNSTABLE WORKPIECE
HAZARD!
Workpieces that cannot be
supported or stabilized without
WARNING!
a fence or miter guage should
Motor
Bandsaw
not be cut on this bandsaw,
UNSTABLE WORKPIECE
161 FPM
because they can unexpectedly
HAZARD!
270 FPM
move while cutting and draw the
378 FPM
Workpieces that cannot be
supported or stabilized without
operator's hands into the blade,
a fence or miter guage should
causing serious personal injury.
not be cut on this bandsaw,
Examples are chains, cables,
because they can unexpectedly
round or oblong-shaped work-
move while cutting and draw the
pieces, workpieces with internal
operator's hands into the blade,
or built-in moving or rotating
causing serious personal injury.
parts, etc.
Examples are chains, cables,
round or oblong-shaped work-
pieces, workpieces with internal
or built-in moving or rotating
parts, etc.
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
414
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
DANGER
PANTONE 485 C or RAL 3001
CAUTION
PANTONE 109 C
WARNING
PANTONE 151 C or RAL 2005
PANTONE 3005 C or RAL 5005
NOTICE
PANTONE 109 C
CAUTION
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
413
FOR GRIZZLY MACHINES ONLY!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
artwork changes are required, contact us immediately at manuals@grizzly.com.
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
412
411
G0970
410
REF PART #
DESCRIPTION
401
P0970401
MODEL NUMBER LABEL
402
P0970402
MACHINE ID LABEL
403
P0970403
BLADE TENSION HANGING NOTICE
404
P0970404
BLADE SPEED LABEL
405
P0970405
DOOR INJURY HAZARD LABEL-LARGE
406
P0970406
FIRE HAZARD LABEL
407
P0970407
DOOR INJURY HAZARD LABEL-SMALL
408
P0970408
SAFETY GLASSES LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-60-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
G0970 Labels A
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
Specifications
Motor: 3/4 HP, 110V/220V, 1-Phase, 60 Hz
Prewired: 110V
Full Load Amps: 10A (110V); 5A (220V)
Table Size: 14" x 14"
Blade Speeds: 161, 270, 378 FPM
Blade Length Range: 92-1/2"–93-1/2"
Blade Width Range: 1/8"–3/4"
Max. Cutting Width (Left of Blade): 13-1/4"
Max. Cutting Height: 6"
WARNING!
Table Tilt: 15˚ Left, 45˚ Right
Weight: 238 lbs.
EYE INJURY
FIRE HAZARD!
G0970 Labels B
HAZARD!
Do not attempt to
connect this
Always wear safety
machine to a dust
(08/01/23)
glasses when using
collector.
this machine.
WARNING!
FIRE HAZARD!
Do not attempt to
connect this
Motor
Bandsaw
machine to a dust
collector.
161 FPM
270 FPM
378 FPM
The blade was purposely left
untensioned for shipping
WARNING!
purposes. Make sure you
To reduce risk of death
INJURY HAZARD!
properly tension the blade
or serious injury, read
manual BEFORE using
Do not open door
(see manual) before starting
machine.
The blade was purposely left
while machine is
this bandsaw!
To get a new manual,
untensioned for shipping
connected to power
call (800) 523-4777 or
purposes. Make sure you
or blade is in motion.
go to www.grizzly.com.
properly tension the blade
(see manual) before starting
this bandsaw!
FOR GRIZZLY MACHINES ONLY!
WARNING!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
UNSTABLE WORKPIECE
HAZARD!
Workpieces that cannot be
supported or stabilized without
a fence or miter guage should
not be cut on this bandsaw,
because they can unexpectedly
move while cutting and draw the
operator's hands into the blade,
causing serious personal injury.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Examples are chains, cables,
If
round or oblong-shaped work-
If
pieces, workpieces with internal
or built-in moving or rotating
parts, etc.
COLOR CODES
DANGER
WARNING
CAUTION
NOTICE
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
Do not open door
machine.
while machine is
To get a new manual,
connected to power
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com.
• 1:1 Sizing (Labels are
actual size)
WARNING!
(08/01/23)
• Labels must be made of
402
oil-resistant material
UNSTABLE WORKPIECE
HAZARD!
Workpieces that cannot be
MODEL G0970
supported or stabilized without
14" VERTICAL METAL-CUTTING
a fence or miter guage should
BANDSAW
not be cut on this bandsaw,
WARNING!
because they can unexpectedly
To reduce risk of serious injury when using this machine:
move while cutting and draw the
1. Read and understand owner's manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection.
operator's hands into the blade,
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
causing serious personal injury.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades, making adjustments, or
Examples are chains, cables,
servicing.
8. Maintain proper adjustment of blade tension, tracking, guides, and support
Maintain proper adjustment of blade tension, tracking, guides, and support
round or oblong-shaped work-
bearings.
9. Keep upper guides adjusted to just clear workpiece.
pieces, workpieces with internal
10. Hold workpiece firmly against table to maintain control.
• 1:1 Sizing (Labels are
11. Only run bandsaw with wheel covers closed and guards in place.
or built-in moving or rotating
12. Use fixtures, not your hands, to hold small or round workpieces.
actual size)
13. Never reach under table while blade is in motion.
parts, etc.
14. DO NOT wear loose clothing, gloves, jewelry, or other articles that can get
• Labels must be made of
, or other articles that can get
entangled. Tie back long hair and roll up sleeves.
15. DO NOT expose to rain or use in wet locations.
oil-resistant material
16. DO NOT operate under influence of drugs or alcohol, or when tired.
17. Prevent unauthorized use by children or untrained users.
COLOR CODES
DANGER
WARNING
408
CAUTION
WARNING!
WARNING!
COLOR CODES
EYE INJURY
FIRE HAZARD!
NOTICE
DANGER
PANTONE 485 C or RAL 3001
HAZARD!
Do not attempt to
connect this
Always wear safety
WARNING
PANTONE 151 C or RAL 2005
machine to a dust
glasses when using
PANTONE 711C or RAL 3020
collector.
GRIZZLY LOGO RED
this machine.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
artwork changes are required, contact us immediately at manuals@grizzly.com.
If
Motor
Bandsaw
artwork changes are required, contact us immediately at manuals@grizzly.com.
161 FPM
407
270 FPM
378 FPM
WARNING!
The blade was purposely left
INJURY HAZARD!
untensioned for shipping
Do not open door
purposes. Make sure you
while machine is
connected to power
properly tension the blade
or blade is in motion.
(see manual) before starting
this bandsaw!
406
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
PANTONE 109 C
PANTONE 3005 C or RAL 5005
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FIRE HAZARD!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Do not attempt to
connect this
If
machine to a dust
collector.
409
405
WARNING!
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
REF PART #
409
P0970409
410
P0970410
411
P0970411
412
P0970412
413
P0970413
414
P0970414
415
P0970415
416
P0970416
HAZARD!
Always wear safety
glasses when using
this machine.
403
Motor
Bandsaw
161 FPM
270 FPM
378 FPM
The blade was purposely left
untensioned for shipping
purposes. Make sure you
properly tension the blade
(see manual) before starting
this bandsaw!
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
PANTONE 109 C
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
DESCRIPTION
GRIZZLY NAMEPLATE-SMALL
GRIZZLY.COM LABEL
TOUCH-UP PAINT, GRIZZLY GREEN
TOUCH-UP PAINT, GRIZZLY BEIGE
DISCONNECT LABEL
ELECTRICITY LABEL
UNSTABLE WORKPIECE LABEL
READ MANUAL LABEL
Model G0970 (Mfd. Since 07/23)
Do not attempt to
connect this
machine to a dust
collector.
If
404
Motor
Bandsaw
161 FPM
270 FPM
378 FPM
Advertisement
Table of Contents
