Miter Cutting
The crosscut fence allows miter cuts from 0˚
through 135˚. The table mounted miter scale has
a resolution of 1˚.
To perform a miter cut:
1.
Slide crosscut table to front edge of sliding
table and lock it in place.
2.
Place crosscut fence center stud in left or
right stud hole of crosscut table. Fence can
be installed as shown in Figure 84 for 90˚ to
135˚ cuts, or as shown in Figure 85 for 0˚ to
90˚ cuts.
Figure 84. Fence set-up for 90˚ to 135˚ cuts.
Model G0623X/G0623X3 (Mfd. Since 05/22)
3.
Rotate fence to desired angle and lock it in
place.
4.
Position flip stop according to length of
workpiece you want to cut off to the left of the
blade.
5.
Load workpiece onto table saw. Setup should
look similar to Figure 85.
Figure 85. Example of miter cutting operation.
6.
Once all necessary safety precautions have
been taken, perform cutting operation.
-49-