Crosscutting - Grizzly G0623X Owner's Manual

Crosscutting

The Model G0623X/G0623X3 can crosscut full-
size panels with the fence in the forward or rear
position, although it is easier to load full-size pan-
els with the crosscut fence mounted in the forward
position (see Figure 79).
Forward Mounted
Crosscut Fence
Figure 79. Crosscutting full-size panel.
Mounting the crosscut fence in the rear position
(Figure 80) gives greater stability for crosscutting
smaller panels.
Figure 80. Crosscutting smaller panels.
Model G0623X/G0623X3 (Mfd. Since 05/22)
Rear Mounted
Crosscut Fence
Additionally, this machine has the capability of
crosscutting workpieces while using the rip fence
as a cut-off gauge (Figure 81).
Figure 81. Crosscutting workpieces using the rip
fence as a cut-off gauge.
Determine which cutting operation will be best
suited for the workpiece to be crosscut.
— If you will be crosscutting full-size panels,
then skip ahead to Crosscutting Full-Size
Panels.
— If you will be crosscutting smaller panels,
then skip ahead to Crosscutting Smaller
Panels.
— If you will be crosscutting workpieces using
the rip fence as a cut-off gauge, then skip
ahead to Crosscutting Using Rip Fence
as a Cut-Off Gauge.
-47-