Unpacking And Checking Contents; Tools Needed - RIDGID AC9910 Owner's Manual

Unpacking and Checking Contents

Tools Needed

7/16", 1/2 and 9/16" Wrench
Phillips Screwdriver
Unpacking
WARNING: For your own safety, turn
switch "OFF" and remove plug from
power source outlet before mounting
power tool onto leg set.
NOTE: The Universal Bench Top Power
Tool Legstand may be assembled in many
different height and width configurations.
Separate all parts from packing material
and check each part with the illustration
until all items are accounted for before
discarding any packing materials. If any
parts are missing or damaged, do not
attempt to continue assembling this item.
Call 1-800-4-RIDGID or E-mail us at
info@ridgidwoodworking.com to get the
missing part.
A
CL
Bag of
Loose Parts
Hand Drill
The following parts are included:
Part
Stamped
A
A
B
CL Lower Stiffener Left....................... 4
CR Lower Stiffener Right .................... 4
D
NOTE: Nuts, bolts, screws and washers
are shown full size on the following pages.
A
CR
Table (Particle Board)
4
5/16" Drill Bit
#2 Phillips Bit
Description
Upper Stiffener ............................. 3
Upper Stiffener with Logo ............. 1
Upper Leg..................................... 4
Lower Leg ..................................... 4
Bag of Loose Parts ....................... 1
Table (Particle Board) ................... 2
B
Qty.
D