Final Assembly - RIDGID AC9910 Owner's Manual

5. Using a drill or phillips screwdriver,
drive the four pan head screws Ty "AB"
#8 x 3/4 from below as shown. (No pilot
hole is needed.)

Final Assembly

Place the tool on the table boards. Refer to
pages 6 and 7 for correct location.
Securely tighten all nuts, bolts and screws.
Adjust and tighten leveling feet.
Pan Head Screw
1/4-20 x 1-1/4
Flat
Washer
Pan Head Screw
Ty "AB" #8 x 3/4
13
Pan Head Screw
Ty "AB" #8 x 3/4
Flat Washer
Lockwasher
Hex Nut