Setup Precautions; Changing The Projector Elevation Angle - Casio XJ-H1600 Setup Manual

Setup Precautions

Use a conveniently located power outlet that you can reach easily when you need to unplug the
projector.
Do not allow any objects to be within the area indicated by the dashed line below, which is an area
within 30cm (11.8 inches) of the projector. Keep all obstacles and other objects at least 30cm away
from the projector's vents.
Airflow from air conditioning equipment can blow the heat being exhausted from the area around the
projector's lens in a way that causes heat ripples to appear in the projected image. If this happens,
adjust the airflow of the air conditioning equipment or move the projector.
Intake-exhaust vents
Intake-exhaust vents

Changing the Projector Elevation Angle

1.
Lift up the front of the projector and press the release button 1.
This will cause the front foot
2.
While holding down the release button, raise and lower the front of the projector.
When the front foot is approximately the height you want, release the release
button.
The front foot will lock at the position where you release the release button.
30cm
(11.8 inches)
2 to extend from the projector.
2
3
E-13
Getting Ready
Intake-exhaust vents
Intake vents
1