Advertisement
Quick Links
HN350401** HN350802**
HN351602** HN35**0*00N
Network Video Recorder
HN350401**, HN35040100N, HN35080100N
×6
×12
HN350802**, HN351602**, HN35160200N
×2
×6
HN350401**
HN350401**
HN350802**
HN35040100N
HN35040100N
HN351602**
HN35080100N
HN35080100N
HN35160200N
×2
×2
×2
HN350401**
HN350802**
HN351602**
HN35040100N
HN35160200N
HN35080100N
PH
STATUS
NET
POWER
USB
For Single Disk
HN350401**/HN35040100N/HN35080100N
1
2
3
4
5
6
×4
For Dual-Disk
HN350802**/HN351602**/HN35160200N
1
2
3
Advertisement
Related Manuals for Honeywell HN350401 Series
Summary of Contents for Honeywell HN350401 Series
- Page 1 For Dual-Disk STATUS POWER HN350802**/HN351602**/HN35160200N HN350401** HN350802** HN351602** HN35**0*00N For Single Disk Network Video Recorder HN350401**/HN35040100N/HN35080100N HN350401**, HN35040100N, HN35080100N ×6 ×12 HN350802**, HN351602**, HN35160200N ×2 ×6 HN350401** HN350401** HN350802** HN35040100N HN35040100N HN351602** HN35080100N HN35080100N HN35160200N ×2 ×2 ×2 HN350401** HN350802** HN351602** HN35040100N HN35160200N...
- Page 2 Monitor 130W, PoE 802.3at/af in total. Power (Not included) Caution The Honeywell product uses a 3.3V CR2032 lithium battery as the power Monitor Power supply for its internal real-time clock (RTC). Low battery power affects the (Not included) operation of the RTC, causing it to reset at every power-up.
- Page 3 +1 800 323 4576 (North America) Document 800-27004 – Rev B – 03/2022 © 2022 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.