Section 3 - Configuration
Click Services > Firewall > Port Forwarding, the page shown in the following figure appears. This page allows you to config port forwarding, so
others can access the local server through the Gateway.
The following table describes the parameters of this page:
Field
Application
Predefined rules. You can select and enable it.
Comment
Description of the rule.
Enter the specific IP of the local PC which
Local IP
provide the connection to the WAN side.
Local Port
Port range of the local service.
Remote Port
Port range on the WAN side.
Protocol
Select the protocol use for service.
Interface
Set the rule take effect on which interface.
D-Link DPN-101G User Manual
Port Forwarding
Description
20