Canon FINISHER - D1 Service Manual page 51

c. Offset Operation
The front or the rear jogging plate shifts each sheet that arrives toward the front or rear. The
direction will be
i. If a sheet exists on tray B, in the direction opposite it.
ii. If no sheet exists on tray B, depends on the selected paper size and mode.
When shifting to the front, the machine uses the front jogging plate as the reference for butting,
causing the rear jogging plate to move the sheet toward the front.
When shifting to the rear, the machine uses the rear jogging plate as the reference for butting,
causing the front jogging plate to move the sheet to the front.
The machine executes offset operation each time a sheet is pulled onto the processing tray.
COPYRIGHT © 1999 CANON INC.
Tray B
Shifting to the Front
Figure 2-214
Tray B
Shifting to the Rear
Figure 2-215
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 OPERATIONS
Rear
jogging plate
Sheet to be
shifted
Front jossing
plate
Rear jogging
plate
Sheet to be
shifted
Front jogging
plate
2-25