Canon FINISHER - D1 Service Manual page 3

This Service Manual contains basic data and figures on the Finisher-D1 needed to
service the machine in the field.
CHAPTER 1 General Description introduces the finisher's features and specifications,
and shows how to operate the finisher.
CHAPTER 2 Basic Operation provides outlines of the finisher's various mechanical
workings, and explains the principles used for the finisher's various control mechanisms in
view of the functions of electrical and mechanical units and in relation to their timing of
operation.
CHAPTER 3 Mechanical System shows how the finisher's various mechanical
workings are constructed, and how the finisher may be disassembled/assembled and
adjusted.
CHAPTER 4 Maintenance and Servicing provides tables of periodically replaced
parts and consumables/durables and scheduled servicing charts.
CHAPTER 5 Troubleshooting provides tables of maintenance/inspection, standards/
adjustments, and problem identification (image fault/malfunction).
APPENDIX contains a general timing chart and general circuit diagrams.
The descriptions in this Service Manual are subject to change without notice for
product improvement or other purposes, and major changes will be communicated in the
form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify and
isolate faults in the machine.
COPYRIGHT © 1999 CANON INC.
INTRODUCTION
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)