NEC SL2100 Programming Manual page 489

ISSUE 2.0
Item Item
No.
02 Override Mailbox Category (Over-
ride MB Ctg)
Use this option to specify the category
of the mailbox where Automated At-
tendant calls should route when you
enable Answer Schedule Override.
• If the Override Mailbox is a Station
Mailbox, the outside caller hears
the mailbox greeting (if recorded)
and can leave a message.
• If the Override Mailbox is a Group
Mailbox, the outside caller shears
the recorded announcement. De-
pending on how the Announcement
Mailbox is programmed, InMail then
hangs up, reroutes the call, or pro-
vides additional dialing options.
• If the Override Mailbox is a Routing
Mailbox, the outside caller hears
the instruction menu and can dial
any option allowed by the associ-
ated Dial Action Table.
If any of the Input Data values are
entered, the terminal displays the
Override Mailbox Number selec-
tion (below).
Override Mailbox Number (Override
MB Num)
Use this option to specify the mailbox
where Automated Attendant calls
should route when you enable Answer
Schedule Override. The mailbox num-
ber you select in this option should
match the mailbox category specified
in 47-11-02 : Override Mailbox Cate-
gory above.
Programming Manual
Input Data
0 = Undefined Category 0 = Skip Mailbox No.
1 = Station Mailbox setting
2 = Group Mailbox Category 1 = Mailbox No. should
3 = Routing Mailbox be 1 ~ 128. refer to
Mail Station Mailbox Options on
page
Category 2 = Mailbox No. should
be 1 ~ 32. refer to
Mail Group Mailbox Options on
page
Category 3 = Mailbox No. should
be 1 ~ 32. refer to
Mail Routing Mailbox Options on
page
Up to 3 digits (using 0 ~ 9) Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No. should
be 1 ~ 128. refer to
Mail Station Mailbox Options on
page
Category 2 = Mailbox No. should
be 1 ~ 32. refer to
Mail Group Mailbox Options on
page
Category 3 = Mailbox No. should
be 1 ~ 32. refer to
Mail Routing Mailbox Options on
page
Description
<47-02 : In-
2-447>
<47-03 : In-
2-451>
<47-07 : In-
2-456>
No Setting
<47-02 : In-
2-447>
<47-03 : In-
2-451>
<47-07 : In-
2-456>
SL2100
Default
0
Program
47
2-465