NEC SL2100 Programming Manual page 143

ISSUE 2.0
Item Item
No.
07 DP to DTMF Con-
version Options
08 Answering Con-
dition
09 Busy Tone De-
tection
10 Caller ID
11 Next Trunk in Ro-
tary if No Dial
Tone
12 Detect Network
Disconnect Sig-
nal
13 Trunk-to-Trunk
Limitation
17 Synchronous
Ringing
18 Busy Tone De-
tection on Talk-
ing
19 Busy Tone De-
tection Frequen-
cy
20 Busy Tone De-
tection Interval
23 Caller ID Receiv-
ing Method
24 Use Call Waiting
Caller ID
Programming Manual
Input Data
0 = Automatic Determine how a user can convert a
1 = Automatic and Dial Pulse (DP) call to a DTMF call.
Manual For each trunk, set the type of DP to
2 = Manual DTMF conversion required. There
are three conversion options: Auto-
matic (0), Automatic and Manual (1),
or Manual (2).
Automatic:
DP to DTMF conversion occurs au-
tomatically if the extension user
waits more than 10 seconds before
dialing the next digit.
Automatic and Manual:
DP to DTMF conversion occurs au-
tomatically if the extension user
waits more than 10 seconds before
dialing the next digit. In addition, the
user can dial # to switch a DP trunk
to DTMF dialing.
Manual:
Users can dial # to switch a DP
trunk to DTMF dialing.
0 = Polarity Reversing
(Polarity)
1 = Polarity Reversing
or Timer (Int Digit)
0 = Disable (No)
1 = Enable (Yes)
0 = Off (Caller ID not Enable or disable a trunk ability to
displayed.) receive Caller ID information.
1 = On ( Caller ID is
displayed.)
0 = Disable (No) Use this option to enable/disable the
1 = Enable (Yes) system ability to skip over a trunk if
dial tone is not detected. This option
pertains to calls placed using Speed
Dial, ARS, Last Number Redial or
Save Number dialed. It does not
pertain to line key or Direct Trunk
Access calls.
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable
1 = Enable
0 = Disable
1 = Enable
1 ~ 255
0 ~ 64800 (x 100 ms)
0 = Wait Caller ID Rings extension before receiving
1 = Immediate Ring Caller ID (1) or after receiving Caller
ID (0).
0 = Off Set the Call Waiting Caller ID.
1 = On
Description Default
SL2100
Related
Program
2 21-01-03
Program
14
1 21-01-03
0
1
0
1
0
1
0
1 14-02-18
0 14-02-18
1
1 14-02-10
2-119