Download Print this page
NEC SL2100 Quick Reference Manual
Hide thumbs Also See for SL2100:

Advertisement

Quick Links

SL2100 Mobile Extension Quick Reference Guide
Thank you for purchasing NEC SL2100 system.
Due to the flexibility built into the system, your Dialling Codes and Feature Capacities may differ from those in this guide.
Check with your Supplier / System Administrator and make a note of any differences.
Placing Calls
Placing an Outside Call ...
Dial codes for outside lines :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
9
0
3. Dial
or
and Outside number.
or
8 0 4
Dial
and Line group number (01-50)
and Outside number.
or
# 9
# 0
Dial
or
and Line number (e.g., 005 for line
5) and Outside number.
Calling a Co-Worker, Paging
and Voice Mail ...
Dial using the Intercom :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
3. Dial co-worker's extension number.
Your call will ring or voice-announce. If you hear
ringing, wait for an answer. If you hear two beeps,
begin speaking. Dialing 1 changes voice/ring
mode.
or
8 0 1
For Paging, dial
and 0 for All Call, or 1-50
for zones.
or
8
For your mailbox, dial
.
LIABILITY DISCLAIMER
NEC Enterprise Solutions reserves the right to change the specifications, functions, or features, at any time, without notice.
NEC Enterprise Solutions has prepared this document for use by its employees and customers. The information contained herein is the property
of NEC Enterprise Solutions and shall not be reproduced without prior written approval from NEC Enterprise Solutions.
Copyright 2017 NEC Enterprise Solutions
NEC Enterprise Solutions
If your call doesn't go through ...
 Camp On and Callback
When you hear busy tone, use Camp On
or Callback :
8 5 0
1. Dial
to Camp On. (Wait without hanging up)
(Intercom Calls) When you hear ringing, wait for
the called party to answer.
(Outside Calls) When you hear new dial tone,
begin dialing your number.
or
8 5 0
Dial
and hang up to leave a Callback.
Wait for the system to call you back.
2. Lift handset when the system rings you back.
3. Dial
to accept call.
(Intercom Calls) Speak to co-worker.
(Outside Calls) Begin dialing your number.
To cancel your Callback :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
8 7 0
3. Dial
and hang up.
Answering Calls
Answering Outside / Intercom
Calls ...
Listen for ringing :
1. Lift the handset.
2. Dial
to accept call.
Picking up calls not ringing
your phone ...
When a call is ringing a co-worker's phone within
your group :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
#
3. Dial
.
To pick up a call at a specific co-worker's phone :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
3. Dial
and co-worker's extension number.
Handling Your Calls
Your call can wait at your phone ...
 Hold
Use Hold instead of leaving the handset
off-hook :
#
1. Do not hang up and dial
.
This puts your call on Exclusive Hold. If you go on
hook, the held call will ring back.
To place the call on Group Hold (so only those in
your Department can pick up the call), dial 832
after dialing * #. You can go on hook.
Easily retrieve a call from Hold :
#
1. Dial
.
To retrieve a call from Group Hold, dial 862 instead
#
of dialing
.
Have a telephone meeting
(Conference) ...
Use Conference to have a telephone meeting :
#
1. Place or answer call. Dial
listen for tone, and
8 2 6
dial
.
#
2. Place / answer next call. Dial
listen for tone,
8 2 6
and dial
.
You may have up to 16 callers. Your software
determines if there is any restriction on the
number of outside parties. Repeat this step to add
more parties.
#
3. After adding all parties, dial
twice to set up
the Conference.
Transferring your calls ...
 Transfer
Send (Transfer) your call to a co-worker :
#
1. Do not hang up and dial
, and dial your co-
worker's extension.
To transfer the call to a co-worker's mailbox, dial
the Voice Mail master number before their
extension.
2. (Option) Announce the call when your co-worker
answers.
3. Hang up to transfer the call through.
SL2100 Mobile Extension User Guide Issue-1.0 Sep 2017

Advertisement

loading

Summary of Contents for NEC SL2100

  • Page 1 NEC Enterprise Solutions has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Enterprise Solutions and shall not be reproduced without prior written approval from NEC Enterprise Solutions.
  • Page 2 You will hear stutter dial tone when you next go off numbers : hook. 1. Lift handset, dial Personal DDI or allocated number. Listen for dial tone. 2. Dial and Bin (0-9). The stored number dials out. NEC Enterprise Solutions SL2100 Mobile Extension User Guide Issue-1.0 Sep 2017...