Makita VC008G Instruction Manual page 13

1
Fig.22
► 1 . Front cuff 22 2. Front cuff 24
When using ø28 mm dust extraction
hose
Attach the front cuff to the hose for dust extraction.
1.
When connecting the front cuff, make sure that it is
securely screwed on the hose.
Connect the front cuff to the tool's extraction
2.
outlet.
3
Fig.23
► 1 . Front cuff 2. Extraction outlet 3. Hose
The front cuff can be detached by turning it counter-
clockwise while holding the hose.
2
2
1
13 ENGLISH
When using ø38 mm hose with front
cuff 38
Twist and insert the joint or the front cuff to the
1.
inlet part on the hose, depending on the tool that you
are going to connect.
Connect the front cuff to the tool's extraction
2.
outlet.
4
Fig.24
► 1 . Joint 2. Front cuff 3. Extraction outlet 4. Hose
To remove the joint and the front cuff, follow the installa-
tion procedures in reverse.
Installing filter bag / dust bag
Optional accessory
Do not use a damaged filter bag.
CAUTION:
Always use the vacuum cleaner with the filter bag
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
operator.
3
1
2