Grizzly T32961 Instructions Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T32961 60mm Pipe Bender bends
1½" round pipe up to a maximum bending angle
of 180º.
Optional roller dies (sold separately) provide addi-
tional functionality to bend flat stock, C-channel,
round tube, square tube, and rectangular tube
(see Accessories on Page 7).
Specifications
Mild Steel Capacities
Round Pipe Max Capacity (Mild Steel) .............1½"
Round Pipe Max Wall Thickness .................0.125"
Round Pipe Min Outer Bending Radius .......... 20"
Max Bending Angle ....................................... 180º
Weight ........................................................67 lbs.
Optional Roller Die Capacity
Flat Stock Max Capacity (Mild Steel) ..............1¼"
C-Channel Max Capacity (Mild Steel) ........ 1" x 2"
Round Tube Max Capacity (Mild Steel) ............. 2"
Square Tube Max Capacity (Mild Steel) ............ 2"
Rect. Tube Max Capacity (Mild Steel) ........ 1" x 2"
Inventory (Figures 1–2)
Description
A. Model T32961 60mm Pipe Bender ............. 1
B. Handle Crank .............................................. 1
C. Open-Ends Wrench 22/24mm ..................... 1
D. Hex Wrench 6mm ........................................ 1
E. Flat Washer 8mm ........................................ 1
F.
Cap Screw M8-1.25 x 20 ............................. 1
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © OCTOBER, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 09/21) #KS22034 PRINTED IN CHINA
MODEL T32961
60MM PIPE BENDER
Figure 1. Model T32961 inventory.
Qty
Figure 2. Loose items inventory.
INSTRUCTIONS
To reduce your risk of
serious injury, read this
entire manual
using machine.
A
B
C
BEFORE
F
E
D
V1.10.21