Grizzly T32715 Instructions Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The T32715 Tube Bender Set is designed to bend
most common tube sizes on a safe centerline
radius. The set comes with
and ⁄ " round dies, as well as
7
8
dies.
To reduce your risk of
serious injury, read this
entire
using machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ ", ⁄ ", ⁄ ",
3 1 9 5
8 2 16
⁄ " and 1" square
3
4
manual BEFORE
Figure 1. Model T32715 Tube Bender Set.
COPYRIGHT © MAY, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 05/21) #CS21852 PRINTED IN CHINA
TUBE BENDER SET
Specifications
• Round Tube Capacity ........................
• Square Tube Capacity .........................
⁄ ", ⁄ ", • Maximum Bending Angle ...................... 180°
3
8 4
• Maximum Bending Capacity .........18 Gauge
• Weight ................................................58 lbs.
Needed for Setup
• Safety Glasses ......................................1 Pr.
• Cleaner/Degreaser ..................... As Needed
• Disposable Shop Rags ............... As Needed
• Disposable Gloves ..................... As Needed
• Mounting Hardware .................... As Needed
• Open-End Wrench or Socket 22mm .......... 1
• Hex Wrench 3mm ....................................... 1
MODEL T32715
INSTRUCTIONS
⁄ "– ⁄ "
3 7
8 8
⁄ "–1"
3
4
V1.05.21