Casio Exilim EX-Z1050 User Manual page 239

Problem
The flash does not fire.
Camera powers down during
self-timer countdown.
The monitor screen image is
out of focus.
There is a vertical line on the
monitor screen.
There is digital noise in
images.
An image I shot was not
saved.
1) If " " (Flash Off) is selected as the flash mode, change to another mode (page 72).
2) If the battery is dead, charge it (page 35).
3) If a BEST SHOT scene that uses the "
flash mode (page 72) or select a different BEST SHOT scene (page 87).
The battery may be dead. Charge the battery (page 35).
1) You may be using Manual Focus and have not focused the image. Focus the image (page 112).
2) You may be using the macro mode
portrait shots (page 105).
3) You may be trying to use Auto Focus or the Infinity Mode
Macro Mode for close ups (page 106).
Shooting a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is
a CCD phenomenon known as "vertical smear", and does not indicate malfunction of the camera. Note that
vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a
movie.
1) Sensitivity may have been increased automatically for a dark subject, which increases the chance of
digital noise. Use a light or some other means to illuminate the subject.
2) You may be attempting to shoot in a dark location while "
which can increase digital noise and make images appear coarse. In this case, change to a different
flash mode (page 72) or use lights for illumination.
3) Flash assist or dynamic range may be enabled for snapshots, which can cause an increase in digital
noise. Use a light or some other means to illuminate the subject.
1) Camera power may have been turned off before the save operation was complete, which will result in
the image not being saved. When the battery indicator shows "
possible (page 35).
2) You may have removed the memory card from the camera before the save operation was complete,
which will result in the image not being saved. Do not remove the memory card before the save
operation is complete.
Possible Causes and Action
" (Flash Off) flash mode is selected, change to a different
for scenery or portraits. Use Auto Focus for scenery and
239
when shooting a close-up shot. Use the
" (Flash Off) is selected as the flash mode,
", charge the battery as soon as
APPENDIX