Casio Exilim EX-Z1050 User Manual page 192

■
Printing on a Printer that Supports
PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a PictBridge or USB
DIRECT-PRINT compliant printer and print images without going
through a computer.
• The camera also allows easy connection to a printer. Before
connecting to a printer, be sure to perform the following
procedure first.
1.
Press [MENU].
2.
On the "Set Up" tab, select "USB" and then
press [ ].
3.
Use [ ] and [ ] to select the setting that suits
your printer and then press [SET].
For this type of printer:
USB DIRECT-PRINT compatible
PictBridge compatible
B
Select this setting:
Mass Storage
PTP
192
4.
Check the battery level indicator to make sure
that the battery is fully charged, and then turn
off the camera.
• If battery power is low, replace the battery.
• The camera does not draw power over the USB cable.
5.
Use the USB cable that comes with the camera
to connect the camera to a printer.
Making sure that the
with the mark of the USB cable plug, connect the
cable to the camera.
USB Cable
USB
USB Port
mark on the camera is aligned
USB/AV
connector
PRINTING