Casio Exilim EX-Z1000 User Manual page 99

I
Turning on Anti Shake Using the Menu
1.
In the REC mode, press [MENU].
2.
On the "REC" tab, select "Anti Shake" and
then press [ ].
3.
Use [ ] and [ ] to select "Auto" and then
press [SET].
• This turns on Anti Shake and displays "
monitor screen.
• In this case, Anti Shake will remain on until you turn it off
on the menu.
NOTE
• You can also use the Panel (Operation Panel) (page 53) to
change the Anti Shake setting.
IMPORTANT!
• Anti Shake will not work unless the ISO setting (page 123)
is set to "Auto".
• Shooting with Anti Shake can cause an image to appear
somewhat coarser than normal and can cause slight
deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of hand
or subject movement when movement is severe.
" on the
• Anti Shake is disabled while shooting a movie.
• Anti Shake may not work with a very low shutter speed.If
this happens, use a tripod to stabilize the camera.
• Though "
screen following an automatic flash operation using the
"Auto Flash" or "Red Eye" setting, or while the flash setting
is "Flash On" or "Soft Flash", Anti Shake is disabled.
99
" (Anti Shake) is displayed on the monitor
USING BEST SHOT