Specifying The File Name Serial Number Generation Rule; Changing The Date And Time Setting - Casio Exilim EX-Z1000 User Manual

Specifying the File Name Serial
Number Generation Rule
Use the following procedure to specify the rule that governs
generation of the serial number used in file names (page 174).
1.
Press [MENU].
2.
On the "Set Up" tab, select "File No." and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To have the camera do this:
Remember the current number and
always assign the next one, even if all
files are deleted or if the memory card is
replaced.
Restart the serial number from 0001
whenever all files are deleted or the
memory card is replaced.

Changing the Date and Time Setting

When changing the date and time setting, be sure to do so for
your Home City (the location where you normally use the
camera). If you already have your Home City setting configured
correctly, you can use the procedure under "Setting the Date
and Time for Your Home City" (page 188) to change the current
time setting only, if you want.
IMPORTANT!
• Changing the time and date setting without correctly
configuring your Home City setting first will cause all of the
World Time (page 189) dates and times to be off.
Select this
I
Selecting Your Home City
setting:
1.
Press [MENU].
Continue
2.
On the "Set Up" tab, select "World Time" and
then press [ ].
This displays the current World Time settings.
Reset
187
OTHER SETTINGS