Advertisement
Operating
[ Do following step to operate washer Pump function with NEXPTZ Camera ]
1.
Save the location of nozzle position (washing) on Preset 59.
* First of all, The NEXPTZ pan/tilt direction should be decided and saved that window glass of camera housing toward nozzle
of water jet on preset 59.
2.
Push The [4+On] button on HTX-5000 Keyboard.
* Push the 88+preset button at Pelco protocol.
Result : 1) Pan/Tilt's moving to nozzle position (location Preset 59 )
2) Auto-Stop after Spray water & Wiping ( 5 sec, 6 Wiping )
3) Pan/Tilt's moving back to the previous position
① Set washing position
-.Move the window face to nozzle
Water jet
by using pan/tile and save the
position on preset 59.
② Press
(88+
[ Do following step to operate washer Pump function with NEXH Camera ]
① Pull Joystick to Tilt down function.
Washer
Pump
Honeywell Security Group.
Honeywell Co., Ltd.
Address : 5F, Sangam IT Tower, 434, WorldCupbur-ro
Mapo-gu, Seoul 121-835, Republic of Korea
TEL : +82 2 799 6114 / 6394
FAX : +82 2 799 6188
E-mail: info.security@honeywell.com
and
button.
4
Preset) at Pelco Protocol
- Set the specific position to wash
front window toward the nozzle on
preset 59.
-Run washing and wiping.
-Water will be come out from the
nozzle until Joystick back or released.
- 7 -
Check water level in
the tank
periodically.
Check water level in
the tank
periodically.
Printed in Korea
Advertisement
