User's Guide SMX-AUS
Fig. 36: Zone Test – Test with Loop sounder – Select Zone
Fig. 37: Zone Test – Test with Loop sounder – Select Sounder
34
10. For Loop circuit, the following screen appears with the list of zones in the panel and the
sounder output devices associated with each zone. Tap
11. The following screen appears with the list of sounder output devices in the selected zone.
12. Select a sounder and tap ASSIGN. You can tap UNASSIGN to clear the selection.
13. Tap START TEST.
next to the selected zone.
NS-MN-0032 / 11.2020