ABB EasyLine EL3000 Operating Instruction page 51

EL3000 CONTINUOUS GAS ANALYZERS | OI/EL3000-EN REV. D
Gas connections Uras26 with Magnos206 (model EL3040)
Figure 9: Gas connections Uras26 with Magnos206 (model EL3040)
Uras26: Gas connections
Pos. Connection
1 Pressure sensor
2
Not assigned
3 Sample gas inlet (gas path 1)
4 Sample gas outlet (gas path 1)
5
Purge gas inlet (housing)
6
Purge gas outlet (housing)
7 Sample gas inlet (gas path 2)
8 Sample gas outlet (gas path 2)
Sample gas outlet (gas path 1)
9
Reference gas inlet
10 Reference gas inlet
Note
• The oxygen sensor is not possible in combination with Magnos206
• If the internal gas lines ares designed as hoses, the pressure sensor (standard, not for the 'pressure sensor connected to outside
by hose' option), and the oxygen sensor (option) are internally connected as follows:
– In the output of measuring cell 1, for one measuring cell and for two measuring cells with separate gas paths.
– In the output of measuring cells 2 for two measuring cells in series.
• If the internal gas lines are designed as stainless steel pipes, the version with separate gas paths is not possible.
Supplementary information
The pressure sensor is connected to the Pos. 1 terminal if
the internal gas lines are designed as stainless steel pipes,
or if the 'Pressure sensor connected outside by hose' option
is ordered.
—
—
For a measuring cell and for two measuring cells with
separate gas paths
—
—
—
—
For two sample cells in series
Sample cell 1 flowing reference gas
Version
⅛ NPT female thread (stainless steel 1.4305)
• Connection of hose lines:
straight screw-in socket (PP) with hose nozzles
for hoses with inside diameter 4 mm
(included in scope of delivery)
• Connection of piping:
screw-in fittings
(not included in scope of delivery)
51