Advertisement
If devices are provided for the connection of dust extraction and collection
LP18
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
V d.c.
Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
mm
mm
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
29 m
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
B(A)
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with switch is dangerous and must be
0 dB
repaired.
B(A)
Disconnect the plug from the power source and/or remove the battery
pack, if detachable, from the power tool before making any adjustments,
0 dB
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
m/s²
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
m/s²
the power tool. Power tools are dangerous in the hands of untrained users.
6 kg
Maintain power tools and accessories. Check for misalignment or binding
.1 kg
of moving parts, breakage of parts and any other condition that may
affect the power tool's operation. If damaged, have the power tool
cond
repaired before use. Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
tool.
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from those
any
intended could result in a hazardous situation.
ools.
Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
pes,
and control of the tool in unexpected situations.
ctric
BATTERY TOOL USE AND CARE
ng a
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used
g or
with another battery pack.
es or
Use power tools only with specifically designated battery packs. Use of
ock.
any other battery packs may create a risk of injury and fire.
able
When battery pack is not in use, keep it away from other metal objects,
k of
like paper clips, coins, keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another. Shorting the battery
dual
terminals together may cause burns or a fire.
k of
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
hen
Do not use a battery pack or tool that is damaged or modified. Damaged
ired
or modified batteries may exhibit unpredictable behaviour resulting in fire,
t of
explosion or risk of injury.
ury.
Do not expose a battery pack or tool to fire or excessive temperature.
tion.
Exposure to fire or temperature above 130°C may cause explosion.
hat
Follow all charging instructions and do not charge the battery pack or
onal
tool outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
tion
battery and increase the risk of fire.
p or
SERVICE
h or
Have your power tool serviced by a qualified repair person using only
n. A
identical replacement parts. This will ensure that the safety of the power
esult
tool is maintained.
Never service damaged battery packs. Service of battery packs should only
This
be performed by the manufacturer or authorized service providers.
hair
hair
CORDLESS SECATEURS SAFETY WARNINGS
DANGER! Keep hands away from the blade. Contact with the blade will
result in serious personal injury.
WARNING! Do not leave the product unattended before the LED and
sound indicate that it is off.
Save these instructions. Refer to them frequently, and use them to instruct
others who may use the product. If you loan someone the product, loan them
these instructions also to prevent misuse of the product and possible injury.
Never allow children, persons with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge, or people who are unfamiliar
with these instructions to use the product. Local restrictions may limit the age
of operator.
Do not operate the product in poor lighting. Use the product only in daylight
or good artificial light.
Do not use the product to cut wires.
Do not use the product where there is a risk of hidden wiring.
To reduce the risk of injury associated with contacting moving parts, always
turn off the product, remove the battery pack, and make sure that all moving
parts have come to a stop:
■
before clearing a blockage
■
before checking, cleaning, or working on the product
■
before changing accessories
■
before leaving the product unattended
■
before performing maintenance
Keep the product clean of clippings and other materials. They may
become lodged between the jaw and blade.
Keep the area clear of all bystanders, children, and pets while operating
the product.
When cutting a limb under tension, be alert for springback so that you
will not be struck when the tension in the wood fibres is released.
Maintain the product with care. Keep the cutting blades sharp and
clean for best performance and to reduce the risk of injury. Follow the
instructions for lubricating and changing accessories.
Before using the product, check for damaged parts and press the trigger
to ensure that the cutting blades open and close correctly. Check the
product regularly to make sure that it will operate properly and perform
the intended function. Keep hands away from the blade.
Keep your body warm in cold weather. When operating the product,
wear gloves to keep the hands and wrists warm. It is reported that cold
weather is a major factor contributing to Raynaud's Syndrome.
Injuries may be caused, or aggravated, by prolonged use of the product.
When using any product for prolonged periods, ensure to take regular
breaks.
Operate the product only in temperatures between 0°C and 40°C.
Store the product in a location where the ambient temperature is
between 0°C and 40°C.
ADDITIONAL BATTERY SAFETY WARNINGS
To reduce the risk of fire, personal injury, and product damage due to a
short circuit, never immerse the tool, battery pack, or charger in fluid or
allow fluid to flow inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
Charge the battery pack in a location where the ambient temperature is
between 10°C and 38°C.
Store the battery pack in a location where the ambient temperature is
between 0°C and 40°C.
Use the battery pack in a location where the ambient temperature is
between 0°C and 40°C.
TRANSPORTATION AND STORAGE
Turn off the product, remove the battery pack, and allow both to cool before
storing or transporting.
Remove all foreign materials from the product. Install the blade cover.
17
17
Advertisement
