Advertisement
Quick Links
Advertisement
Related Manuals for AEG ALP18
Summary of Contents for AEG ALP18
- Page 1 ALP18...
- Page 2 mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
- Page 3 ALP18...
-
Page 4: Led Indicator Description
LED INDICATOR LED INDICATOR DESCRIPTION LED indicator Sound Description The product is off. The product is on and ready to Solid green begin cutting. The product has reached its Flashing red overload limit. The material is 2 beeps too large to be cut. The cutting (2 times) blades open. - Page 5 HANDLE BATTERY PORT TRIGGER SWITCH...
-
Page 6: Operating The Product
OPERATING THE PRODUCT REPLACING THE BLADE... -
Page 7: Cleaning The Product
CLEANING THE PRODUCT STORING THE PRODUCT... - Page 8 OPERATING THE PRODUCT NOTE: Never leave the product unattended while the battery is inserted. click NOTE: Hold the trigger for 3 seconds to turn on the product. The product beeps and the blades open if they were initally closed. NOTE: Always keep your non-cutting hand away from the blades while using the product.
- Page 9 NOTE: The product will automatically turn off after 30 seconds of inactivity, leaving the blades open. To turn on again, hold the trigger for 3 seconds until the product beeps. NOTE: Hold the trigger for 3 seconds to turn off the product. The blades will immediately close, followed by 2 beeps after 3 seconds.
- Page 10 REPLACING THE BLADE NOTE: Turn off the product using the trigger to ensure that the blades are locked close. Remove the battery pack before performing any maintenance on the product.
- Page 11 NOTE: Make sure that the replacement blade (ALP1) is placed in the same position as the old one. Ensure that the teeth are seated correctly between each other.
- Page 12 NOTE: Do not overtighten the nut. The torque setting is 0.2 Nm. NOTE: Do not overtighten the bolt. The torque setting is 3.0 Nm. NOTE: Ensure to align the U washer with the teeth of the bolt before tightening it.
- Page 13 NOTE: Do not overtighten the housing cover. The torque setting is 0.4 Nm.
- Page 14 CLEANING THE PRODUCT NOTE: Turn off the product using the trigger to ensure that the blades are locked close. Remove the battery pack before performing any maintenance on the product. NOTE: Put the nozzle of the oil tank against the steel ball, and pour light lubricant oil, such as sewing machine oil, to lubricate the blades.
- Page 15 STORING THE PRODUCT NOTE: Never store the product with the blades open.
- Page 16 If de TECHNICAL DATA CORDLESS SECATEURS ALP18 facil colle Rated voltage 18 V d.c. Cutting capacity beco caus Softwood 30 mm Hardwood 25 mm Product length 0.29 m Noise emission values determined according to IEC 62841-1: for w Sound Pressure Level at Operator Position = 71.8 dB(A)
- Page 17 If devices are provided for the connection of dust extraction and collection CORDLESS SECATEURS SAFETY WARNINGS LP18 facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. DANGER! Keep hands away from the blade. Contact with the blade will V d.c.
-
Page 18: Transporting Lithium Batteries
For transportation in a vehicle, secure the product against movement or falling to prevent injury to persons or damage to the product. Store the product in a cool, dry, and well-ventilated place that is inaccessible Wear head and eye protection. to children. - Page 19 ers, iler...
- Page 24 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trade mark used under 099240001001-02 license from AB Electrolux (publ).