What This Manual Includes; Software And Hardware Revision - GE Centiva/5 Plus Technical Reference Manual

1 Introduction

1.1 What this manual includes

1.1.1 Software and
hardware revision
1-2
This manual covers the service information for the
Centiva/5 Plus CC ventilator
This manual includes test and calibration procedures for software revision 3.01.p.
and hardware revision 3/4, including options
"Bi-level VG"
-
"Newborn"
-
"Trend".
-
The software (SW) and the hardware (HW) revision code are displayed during the
ventilator power-up test and during the system test in the upper left corner in the
screen.
Centiva/5
SW 3.nn.p HW o/r
System test
Complete system set up, seal y-piece
Start system test by pressing
Ensure silver exp. valve is in place
Body weigth 55 kg
Adult Pediatric
The software revision code "3.nn.p" identifies:
3. = Centiva/5 Plus
-
nn. = current base software release
-
p = current patch number of software release (bug fixing level)
-
The hardware revision code "o / r" identifies:
o = front panel hardware revision
-
r = main engine hardware revision.
-
TRM, Centiva/5 Plus, M1047448/CM-922026, rev. 3.50.a of 11/05
Bi-Level VG
+
Newborn
Trend
<Enter>
Newborn
09:36:53
2005-03-21
Bypass
system test
Unlock
exp. valve
Calibrate
O2 sensor
Align
touch screen
Retain
trend data
Enter