Section 4: Operations - Grizzly T23092 Owner's Manual

SECTION 4: OPERATIONS

To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from
paint spray or lung damage from
breathing dust, always wear safety
goggles and a NIOSH-approved res-
pirator when operating this tool.
Disconnect tool from
air to prevent unex-
pected operation dur-
ing service.
Never exceed max PSI
rating for tool.
Do not spray flammable
fluids near open flame
or ignition source.
Always use an approved
spray booth or well-
ventilated area when
spraying to avoid breath-
ing toxic vapors.
Model T23092 (Mfd. Since 04/11)
manual BEFORE
INJURY HAZARD!
INJURY HAZARD!
EXPLOSION
HAZARD!
TOXIC FUME
HAZARD!
Spraying
The Model T23092 high-pressure spray
gun is designed to spray a wide variety
of materials, such as lacquers, stains,
primers, multi-component paints, clear
coats, acrylics, epoxies, etc. It is ideal for
auto body and woodworking projects. This
spray gun is not designed to be used with
waterborne materials.
To operate spray gun:
1. DISCONNECT SPRAY GUN FROM
AIR!
2. Read and follow material manufac-
turer's instructions for spraying, mixing,
safety, disposal, and any other instruc-
tion on the label or Material Safety Data
Sheet (MSDS).
3. Move cup lock lever against vacuum
hose connection to release pressure
between cup hooks and pin—this will
disengage cup lid from cup.
If you are not experienced with this
type of tool, WE STRONGLY REC-
OMMEND that you seek additional
training outside of this manual.
Read books/magazines or get for-
mal training before beginning any
projects. Regardless of the content
in this section, Grizzly Industrial
will not be held liable for accidents
caused by lack of training.
-7
-