Makita HR2652 Instruction Manual page 14

2. Insert a flat-blade screwdriver between the filter
case and the cover of the dust case as shown in the
figure. While pressing and bending the sides of filter
case, lift up the filter case with the flat-blade screwdriver
and remove the filter case.
1
2
3
► 1 . Flat-blade screwdriver 2. Filter case 3. Cover of
the dust case
3. To remove the filter from the filter case, turn them
upside down and push up the filter as shown in the
figure.
► 1 . Filter 2. Filter case
4.
attach them to the dust case aligning the protrusion on
the filter case with the groove on the dust case.
► 1 . Protrusion 2. Groove
5.
it to the tool.
Replacing sealing cap
If the sealing cap is worn out, the performance of the
dust collection decreases. Replace it if it's worn out.
Remove the sealing cap, and then attach a new one
with its protrusion facing upward.
1
2
► 1 . Protrusion 2. Sealing cap
14 ENGLISH
Attach a new filter to the filter case, and then
1
2
Close the cover of the dust case, and then attach
1
2