Specifications - Makita DTD172 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Fastening Machine screw
capacities
Standard bolt
High tensile bolt
No load Max impact mode
speed
Hard impact mode
Medium impact mode
Soft impact mode
Wood mode
Bolt mode
T mode (1)
T mode (2)
Impacts Max impact mode
per minute
Hard impact mode
Medium impact mode
Soft impact mode
Wood mode
Bolt mode
T mode (1)
T mode (2)
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
DTD172
M4 - M8
M5 - M16
M5 - M14
0 - 3,600 min
0 - 3,200 min
0 - 2,100 min
0 - 1,100 min
0 - 1,800 min
0 - 3,600 min
0 - 2,900 min
0 - 3,600 min
0 - 3,800 min
0 - 3,600 min
0 - 2,600 min
0 - 1,100 min
0 - 3,800 min
0 - 3,800 min
-
0 - 2,600 min
D.C. 18 V
114 mm
1.2 - 1.5 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
5 ENGLISH
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
DC18SH