Makita DTDA040 Instruction Manual page 5

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening Standard bolt
capacities
High tensile bolt
Maximum fastening torque
Torque range
No load speed (RPM)
Impacts per minute
Rated voltage
Overall length
Net weight
Applicable USB cable
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DTDA040
M5 - M10
M5 - M8
35 N•m
Approx. 3 - 20 N•m Approx. 5 - 40 N•m
-1
0 - 2,400 min 0 - 2,500 min
-1
0 - 3,700 min
139 mm
1.1 - 1.4 kg
BL1415N / BL1415NA / BL1430B / BL1440 / BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
The tool is intended for screw driving in wood, metal
and plastic.
5 ENGLISH
DTDA070 DTDA100
M5 - M12
M5 - M10
65 N•m 95 N•m
Approx. 6 - 65 N•m
-1
D.C. 14.4 V
1.2 - 1.4 kg
661432-2
DC18SH
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
DTDA140
M6 - M16
M6- M12
140 N•m
Approx. 18 - 80 N•m
-1
0 - 2,700 min
-1
0 - 3,300 min
146 mm
1.2 - 1.5 kg