Swivel Joint - Makita DHW080 Instruction Manual

Rotating wash brush
► Fig.44
Three brushes inside rotate slowly when ejecting the
jet. Suitable for cleaning light dirt on a exterior wall, car
body, bath tub, etc.
Lance extension
► Fig.45
Pipes to extend the length of the trigger gun. Three
different lengths are available by changing the number
of the pipes to be used.
Under body spray lance
► Fig.46
An extra long spray lance with angled nozzle. Best for
cleaning hard-to-reach areas such as car under body
and roof gutter.
CAUTION:
Do not use the under body spray
lance with the lance extension.
Splash guard
► Fig.47
Reduces splash back when cleaning corners with the
dirt blaster.

Swivel joint

► Fig.48
Prevents the high-pressure hose from being twisted.
Connecting joint
► Fig.49
A joint to connect with a nozzle from other model.
Some optional nozzles require the connecting joint
(optional accessory) to attach to the trigger gun. Attach
the connecting joint to the trigger gun in the same way
as the nozzle.
► Fig.50: 1. Nozzle 2. Connecting joint 3. Trigger gun
NOTE: The connecting joint is needed when using
the nozzles included with another model, HW112 or
HW121.
Pipe-cleaning set (10 m/15 m)
► Fig.51
For cleaning and unclogging plumbing and downpipes.
CAUTION:
Pay particular attention to the
water jet when using the pipe cleaning set. Highly
intense water jet is ejected backward. Be sure to
insert the hose head into the pipe before pulling
the trigger.
Extension high-pressure hose (5 m/8 m/10 m)
► Fig.52
Extension hose to connect the high pressure washer
body with the trigger gun.
20 ENGLISH