Handset Sound Signals - GE 25982EE1 User Manual

NEW
NEW VOICE MAIL
NO DATA
NO CALLS
PAGING/PAGING
FROM HANDSET/
PAGING FRM BASE/
PAGING HANDSET
PLEASE REGISTER
PRESS TALK KEY
REPT
TRANSFERRING
UNABLE TO DIAL
UNABLE TO STORE
UNAVAILABLE
UNKNOWN NAME/
CALLER/NUMBER
WAITING HANDSET Prompt telling you to enter registration mode of handset.
REGISTRATION

Handset Sound Signals

Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
Indicates call or calls have not been reviewed.
Indicates a new voice mail is available.
No Caller ID information was received.
Indicates no call have been received.
The page on base or format/trans button on cordless
handset has been pressed.
Indicates the handset needs to be registered before use.
Indicates the CID number is a Directory Dial Number (DDN) and
cannot be formatted.
Repeat call message. Indicates that a new call from the same
number was received more than once.
Indicates the call is being transferred from one handset to
another or from base to cordless handset.
Indicates the CID or memory contents cannot be dialed.
Indicates the CID or memory contents cannot be stored.
Indicates the handset is out of range. Or an additional handset
is in use. Or there has been a base power failure, in which case
you must place all handsets on the main base cradle for 0
seconds to re-establish link with the base.
The incoming call is from an area not serviced by Caller ID or
the information was not sent.
Meaning
Signals an incoming call
Page signal
Low battery warning
41