Installation Review; Installation Time; Customer Responsibilities - Canon Oce VarioPrint 6000 Ultra+ Series Manual

8.

Installation Review

This chapter describes the necessary number of technicians required to install the
machine properly, the time required to install the main unit and optional equipment,
and customer installation responsibilities.

8.1 Installation Time

The time required to install the Océ VarioPrint 6000+ Series depends on the
options and accessories to be installed, and the number of technicians performing
the installation. Customers should discuss the time requirements with their
servicing dealer and schedule the installation accordingly.
The estimated length of time needed to unpack and install the machine and
optional accessories for the minimum and full configurations (multiple PIMs, Print
Guards, and High Capacity Stackers) is provided below. The estimated installation
time is based on a minimum of one technician with trucker support.
Minimum Configuration:
Full Configuration:

8.2 Customer Responsibilities

Identify location for equipment.
Verify strength of floor and level.
Ensure that the equipment can be
delivered to the site.
Confirm proper electrical outlets and
power are available.
Area meets environmental specifications.
Network connections available.
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document
Océ VarioPrint 6000+ Customer Expectations Document
Approximately 6 hours
Approximately 12 hours
Item
Area meets installation space and service space
requirements.
Certified by structural engineers.
Path is clear and unobstructed.
Dedicated power, and enough outlets for equipment (including
accessories).
Temperature and humidity are within specifications, venting
provided if necessary.
If desired.
Comment
Page 38