Table of Contents
Advertisement
8.
Installation Review
This chapter describes the necessary number of technicians required to install the
machine properly, the time required to install the main unit and optional equipment,
and customer installation responsibilities.
8.1 Installation Time
The time required to install the imageRUNNER ADVANCE 8500 and 8500 II Series,
depends on the options and accessories to be installed, and the number of
technicians performing the installation. Customers should discuss the time
requirements with their servicing dealer and schedule the installation accordingly.
The table below indicates the estimated length of time needed to unpack and
install the machine and optional accessories. The estimated installation time is
based on a minimum of one (1) experienced technician.
imageRUNNER ADVANCE 8505i/8505i II and 8595i/8595i II with the
Upright Control Panel
imageRUNNER ADVANCE 8585i/8585i II with the Flat Control Panel
Platen Cover-H1
Upright Control Panel
Paper Deck Unit-E1
POD Deck Lite-C1
Staple Finisher-V1
Booklet Finisher-V1
Booklet Finisher-W1 PRO
Staple Finisher-W1 PRO
Staple Finisher-X1
Booklet Finisher-X1
2/3 Hole Puncher Unit-A1
Puncher Unit-BF1
Puncher Unit-BS1
56 Requires the removal of the standard Single-Pass Duplexing ADF and Reader.
Version 7
imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
Item
56
Estimated Time
35 minutes
34 minutes
12 minutes
29 minutes
9 minutes
12 minutes
13 minutes
18 minutes
18 minutes
17 minutes
14 minutes
17 minutes
8 minutes
13 minutes
17 minutes
Page 88
Advertisement
Table of Contents
