Honda CITY 2021 Manual page 73

uuChild SafetyuSafety of Infants and Small Children
*1: Adjust the seat slide to the rearmost position and adjust the seat back to the
most front lock position.
*2: Forward facing only
*3: The named Child Restraint Systems (CRS) reflect Honda's recommendations
at the date of publication. You should speak to an authorised dealer for up to
date details relating to our recommended CRSs. Other CRS may also be
suitable - please consult CRS manufacturers for recommended vehicle lists.
*4: The head restraint must be removed when attaching a forward facing booster
seat approved by UN R129. Store the removed head restraint in the luggage
compartment so that it does not fly during sudden braking or collision. Also,
when the booster seat is removed, attach the head restraint to the original
seat again and make sure it is locked.
*5: If you can not fix the child restraint system stably, adjust the seat-back angle
to be parallel with the back side of the child restraint system, still keeping it
forward of the seat belt shoulder anchor.
Child restraint systems with support legs can be installed on non i-Size seating
positions. However, the centre seat is excluded.
72
1Locations for Child Restraint System Installation
When purchasing a child restraint systems, make sure
to check the ISOFIX size class or the fixture to ensure
that the seat is compatible with your vehicle.
Fixture
Description
(CRF)
Left lateral-facing (carrycot)
ISO/L1
infant seat
Right lateral-facing (carrycot)
ISO/L2
infant seat
ISO/R1 Rearward-facing infant seat
Reduced-size rearward-facing
ISO/R2X
child restraint systems
Reduced-size rearward-facing
ISO/R2
child restraint systems
Full-size rearward-facing child
ISO/R3
restraint systems
Reduced-height forward-facing
ISO/F2X
child restraint systems
Reduced-height forward-facing
ISO/F2
child restraint systems
Full-height, forward-facing child
ISO/F3
restraint systems
Reduced width forward-facing
ISO/B2
booster seat
Full width forward-facing
ISO/B3
booster seat