Honda CITY 2021 Manual page 311

uuChecking and Maintaining TyresuChecking Tyres
■
Inspection guidelines
Every time you check inflation, also examine the tyres and valve stems.
Look for:
• Bumps or bulges on the side or in the tread. Replace the tyre if you find any cuts,
splits, or cracks in the side of the tyre. Replace it if you see fabric or cord.
• Remove any foreign objects and inspect for air leaks.
• Uneven tread wear. Have a dealer check the wheel alignment.
• Excessive tread wear.
2 Wear Indicators P. 311
• Cracks or other damage around valve stem.
310
1Checking Tyres
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 160 km/h or 99 mph),
adjust the cold tyre pressures as shown below to
avoid excessive heat build up and sudden tyre failure.
Models with 185/60R15 84H tyre
Tyre Size 185/60R15 84H
Pressure *1, *2, *7 Front: 250 kPa (2.5 bar, 36 psi)
Rear: 230 kPa (2.3 bar, 33 psi)
Pressure *3 Front: 240 kPa (2.4 bar, 35 psi)
250 kPa (2.5 bar, 36 psi)
Rear: 230 kPa (2.3 bar, 33 psi)
240 kPa (2.4 bar, 35 psi)
Pressure *6 Front: 250 kPa (2.5 bar, 36 psi)
Rear: 240 kPa (2.4 bar, 35 psi)
*1: Latin American models (right-hand drive type
only)
*2: Malaysian, Bangladeshi, Brunei and Singaporean
models
*3: Indian, Bhutanese, Nepalese and Sri Lankan
models
*4: Petrol models
*5: Diesel models
*6: African models (right-hand drive type only)
*7: Left-hand Drive Type
*4
*5
*4
*5