AEG UltraMix KM4 Series Instruction Book page 9

or utensils during the appliance usage.
• Do not leave this product out of your sight when it is running.
• Ensure all loose matters and your clothes/accessories are kept away while using this
product.
• Never process boiling liquids (max 90°C).
• Do not use this appliance to stir paint. Danger, could result in an explosion!
•
unless the bowl is in place.
• This appliance is intended for domestic use only. The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.
TROUBLESHOOTING
PROBLEM
The motor slows down during
operation.
The motor does not work.
The appliance vibrates /
moves during operation.
The Working light and Power
The attachment scrapes the
Stainless steel bowl during
operation.
The motor head (A) is shaky
during mixing.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with normal
household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To
the battery and electric parts in a safe and professional way. Follow your country's rules for the separate collection of
electrical products and rechargeable batteries.
www.aeg.com
KM4XXX_KM55XX_Assistent_StandMixer_AEG.indd 9
POSSIBLE CAUSE
Amount of dough may exceed maximum capacity.
Dough may be too wet, it sticks onto the side of
the bowl.
The appliance is not connected to the mains.
The rubber feet are wet.
It is normal for heavy loads (e.g heavy dough,
cheese).
The tools usage, speed setting and max capacity
are not aligned with recommendation.
The Speed selector has been left turned on.
The height of the attachment shaft is incorrect.
The motor head screw (U) is too tight.
SOLUTION
Remove half and process in two batches.
the motor speeds up. Process until dough
cleans the side of the bowl.
Make sure to plug in the appliance before
operation.
Make sure the rubber feet at the bottom of
the unit are clean and dry.
Remove half and process in two batches.
Follow the recommended tools usage,
speed setting and capacity provided.
Turn the Speed selector to "Arrest".
Adjust the height of the attachment shaft.
Turn the motor head screw counterclockwise
with screwdriver around one full round.
Please note that too much adjustment can
make the tiltable motor head can't be locked.
If this happen, turn the motor head screw
clockwise.
GB
DE
AR
BG
ES
FR
GR
NL
PT
9