Important; Safety; Fcc Information - Philips 7000 Series User Manual

1

Important

Safety

•
Read these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
•
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including ampli ers) that produce
heat.
•
Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles, and the point where they exit
from the clock radio.
•
Only use attachments/accessories speci ed
by the manufacturer.
•
Unplug this apparatus during lightning storms
or when unused for long periods of time.
•
Refer all servicing to quali ed service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•
Battery usage CAUTION - To prevent battery
leakage which may result in bodily injury,
property damage, or damage to the clock
radio:
• Install all batteries correctly, + and - as
marked on the unit.
• Remove batteries when the unit is not used
for a long time.
• The battery shall not be exposed to
excessive heat such as sunshine, re or the
like.
•
This clock radio shall not be exposed to
dripping or splashing.
•
Do not place any sources of danger on the
clock radio (e.g. liquid lled objects, lighted
candles).
•
Where the plug of the Direct Plug-in Adapter
is used as the disconnect device, the
disconnect device shall remain readily
operable.
2 EN

FCC information

NOTE:
This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit di erent from that
to which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
IC-Canada : CAN ICES-3(B)/NMB-3(B)
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.