Related Manuals for Philips 7000 Series
Summary of Contents for Philips 7000 Series
- Page 1 Soundbar 7000 Series TAB7807 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Important safety instructions Safety 6 Troubleshooting Care for your product Care of the environment Trademarks: Declaration of conformity Help and support FCC information 2 Your Soundbar What’s in the box Soundbar Connectors Wireless subwoofer Remote control Prepare the remote control Placement Wall mount 3 Connect... -
Page 3: Important Safety Instructions
1 Important or into the product, disconnect it from the power outlet immediately. Contact safety Consumer Care to have the product checked before use. instructions • Never place the product and heat sources, including direct sunlight. Read and understand all instructions •... -
Page 4: Care For Your Product
• Never place the product or any Care for your product objects on power cords or on other electrical equipment. • If the product is transported in product. temperatures below 5°C, unpack the product and wait until its temperature matches room Care of the environment temperature before connecting it to the power outlet. -
Page 5: Declaration Of Conformity
Declaration of conformity Help and support This product complies with the radio For extensive online support, visit interference requirements of the www.philips.com/support to: European community. • download the user manual and the Hereby, MMD Hong Kong Holding quick start guide Limited declares that the product •... -
Page 6: Fcc Information
et votre corps. Cet transmetteur ne FCC information liaison avec toute autre antenne ou transmetteur. NOTE: This equipment has been tested • and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits limites de la classe B de la FCC. -
Page 7: Your Soundbar
Images, illustrations and drawings shown on this User Manual are for reference only, actual product may Congratulations on your purchase, vary in appearance. and welcome to Philips! To fully Soundbar www.philips.com/support. This section includes an overview of the soundbar. What’s in the box... -
Page 8: Connectors
Connectors Wireless subwoofer This section includes an overview of the This section includes an overview of the connectors available on your soundbar. wireless subwoofer. 1 AC~ socket Connect to the power supply. 2 Pair button 1 Audio in Press and hold to enter the pairing mode for the subwoofer. -
Page 9: Remote Control
+/- (Subwoofer’s Volume) Remote control Increase / decrease the subwoofer’s volume. This section includes an overview of the remote control. (Standby-On) button • Switch the soundbar On or to standby. • Long press for 20 seconds in power on state to enable or disable APD (15 minutes Auto-Standby) (Source) •... -
Page 10: Placement
• Do not place the remote control on a Replace the remote control battery wet object. Slide to remove the battery compartment • Do not place the remote control cover, insert 2 AAA batteries (1.5V) with under direct sunlight or near sources correct polarity, then slide the battery of excessive heat. -
Page 11: Wall Mount
Wall mount • To prevent injury, this apparatus must be securely Note installation instructions. • • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your soundbar. -
Page 12: Connect
3 Connect Note • The full Dolby Atmos experience is only This section helps you connect your available when the soundbar is connected to the source via a HDMI 2.0 cable. soundbar to a TV and other devices, and • The soundbar will still function when connected then set it up. -
Page 13: Connect To Optical Socket
Using a High Speed HDMI cable, connect the HDMI out (eARC/ARC) connector on your soundbar to the HDMI ARC connector on the TV. Optical in Note • Your TV must support the HDMI-CEC and ARC Optical out function. HDMI-CEC and ARC must be set to On. •... -
Page 14: Connect To Power
» Determine the status based on Connect to power the wireless subwoofer indicator. • Before connecting the AC power LED State Status cord, ensure you have completed all Fast blink Subwoofer in pairing mode other connections. Constant on Connected / Pairing successful •... -
Page 15: Use Your Soundbar
4 Use your Display Status soundbar Audio in Bluetooth This section helps you use the soundbar • Connected to play audio from connected devices. • Connection NO BT Before you start Optical • Make the necessary connections HDMI eARC E-ARC described in the quick start guide HDMI ARC and the user manual. -
Page 16: Dolby Sound Mode
Dolby sound mode Display Description Experience an immersive audio Adjust the bass level experience with Dolby sound modes. Adjust the treble level Press button on the remote control Set the Audio Delay On: Create a Dolby listening • Adjust the center channel volume CTRXX experience. -
Page 17: Factory Reset
AV SYNC Note Set the Audio Delay. • The “BT PAIR” menu will only be displayed when Video image processing, sometimes the current signal source is in “BT” mode longer than the time required to process the audio signal. This is called “delayed.” Audio Delay feature is designed to APD (Auto Standby) remedy this delay. -
Page 18: Play From Bluetooth Devices
Bluetooth devices“ above to pair your Bluetooth device. On the Bluetooth device, switch on Bluetooth, search for and select Philips TAB7807 to start connection Note (see the user manual of the Bluetooth device on how to enable Bluetooth). •... -
Page 19: Listen To An External Device
Listen to an external device Play audio through USB Ensure that the soundbar is connected to Enjoy audio on a USB storage device, the TV or audio device. memory, etc. Press the button repeatedly on the soundbar or on the remote Insert the USB device. - Page 20 5 Product Subwoofer specifications Power supply 100-240V~ 50/60 Hz Power consumption 45 W Note Standby consumption < 0.5 W • Frequency response 35 Hz - 140 Hz to change without notice. Impedance Dimensions 190 x 410 x 309 Bluetooth / Wireless (W x H x D) Weight 6.0 kg...
- Page 21 If you still have a problem, • Increase the volume. Press + (Volume get support at www.philips.com/support. Up) on the remote control or on the soundbar. Main unit •...
- Page 22 • The device is not correctly connected. The subwoofer is idle or the indicator Connect the device correctly. of subwoofer does not light up • The soundbar is already connected • with another Bluetooth device. Unplug power cord from the mains Disconnect the connected device, socket, and plug it in again after 3 and then try again.
- Page 23 Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility Hong Kong Holding Limited. is the warrantor in relation to this product.