Related Manuals for Philips TAB7908
Summary of Contents for Philips TAB7908
- Page 1 Soundbar 7000 Series TAB7908 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Important safety instructions 7 Trademarks Safety Care for your product Care of the environment Declaration of conformity Help and support FCC information 2 Your Soundbar What’s in the box Soundbar Connectors Wireless subwoofer Remote control Prepare the remote control Placement Wall mount 3 Connect... -
Page 3: Important Safety Instructions
1 Important or into the product, disconnect it from the power outlet immediately. Contact safety Consumer Care to have the product checked before use. instructions • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. Read and understand all instructions •... -
Page 4: Care For Your Product
• Never place the product or any Care for your product objects on power cords or on other electrical equipment. Use only microfiber cloth to clean the • If the product is transported in product. temperatures below 5°C, unpack the product and wait until its temperature matches room Care of the environment temperature before connecting it to... -
Page 5: Declaration Of Conformity
Declaration of conformity Help and support This product complies with the radio For extensive online support, visit interference requirements of the www.philips.com/support to: European community. • download the user manual and the Hereby, TP Vision Europe B.V. declares quick start guide that the product is in compliance with the •... -
Page 6: Fcc Information
et votre corps. Cet transmetteur ne FCC information doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur. NOTE: This equipment has been tested • and found to comply with the limits Des câbles blindés doivent être utilisés avec cet apparei l pour for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 7: Your Soundbar
2 Your Soundbar Soundbar This section includes an overview of the Congratulations on your purchase, soundbar. and welcome to Philips! To fully benefit from the support that Philips offers, register your soundbar at www.philips.com/support. What’s in the box Check and identify the items in the package: •... -
Page 8: Connectors
Connectors Wireless subwoofer This section includes an overview of the This section includes an overview of the connectors available on your soundbar. wireless subwoofer. 1 AC~ socket Connect to the power supply. 2 Pair button Press and hold to enter the pairing mode for the subwoofer, which is used for Manual Pairing only. -
Page 9: Remote Control
+/- (Subwoofer’s Volume) Remote control Increase / decrease the subwoofer’s volume. This section includes an overview of the remote control. (Standby-On) button • Switch the soundbar On or to standby. • Long press for 20 seconds in power on state to enable or disable APD (15 minutes Auto-Standby) (Source) •... -
Page 10: Placement
• Do not place the remote control on a Replace the remote control battery wet object. Slide to remove the battery compartment • Do not place the remote control cover, insert 2 AAA batteries (1.5V) with under direct sunlight or near sources correct polarity, then slide the battery of excessive heat. -
Page 11: Wall Mount
Wall mount WARNING! • To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the Note installation instructions. • Suggested wall mounting height: ≤ 1.5 meters. • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Drill 2 parallel holes (diameter 3-8mm Consumer Care in your country. -
Page 12: Connect
3 Connect Note • The full Dolby Atmos experience is only This section helps you connect your available when the soundbar is connected to the source via a HDMI 2.0 cable. soundbar to a TV and other devices, and • The soundbar will still function when connected then set it up. -
Page 13: Connect To Optical Socket
Using a High Speed HDMI cable, connect the HDMI out (eARC/ARC) connector on your soundbar to the HDMI ARC connector on the TV. Optical in Note • Your TV must support the HDMI-CEC and ARC Optical out function. HDMI-CEC and ARC must be set to On. •... -
Page 14: Connect To Power
» Determine the status based on Connect to power the wireless subwoofer indicator. • Before connecting the AC power LED State Status cord, ensure you have completed all Fast blink Subwoofer in pairing mode other connections. Constant on Connected / Pairing successful •... -
Page 15: Use Your Soundbar
4 Use your Optical soundbar Bluetooth • Connected NO BT • Connection This section helps you use the soundbar to play audio from connected devices. Adjust the volume Before you start • Make the necessary connections Adjust the system’s volume described in the quick start guide Press the +/- buttons on the soundbar and the user manual. -
Page 16: Setup Menu
Setup menu EQ ( Select predefined sound modes to suit The unit allows you to configure advanced your video and music: MOVIE, MUSIC, settings to provide you with an even better VOICE, STADIUM. experience. • MOVIE: Create a surround listening experience. - Page 17 Auto volume ( Center ( AUVOL CTR XX Combine Auto volume with Night mode. Adjust the center channel volume. • OFF: • CTR-5 ... CTR+5 Auto volume Do not use “ ” . • ON: Responds in real time to »...
-
Page 18: Factory Reset
On the Bluetooth device, switch on Bluetooth, search for and select Multi-point control Philips TAB7908 to start connection (see the user manual of the Bluetooth The product support multi-point feature, device on how to enable Bluetooth). and can connect two Bluetooth device at same time. -
Page 19: Listen To An External Device
• When the first Bluetooth device Note pause or disconnected, the second Bluetooth device can stream its • The soundbar may not be able to decode all digital audio formats from the input source. In this audio to soundbar. case, the system will mute. This is NOT a defect. •... -
Page 20: Product Specifications
5 Product Power consumption 24 W specifications Standby consumption < 0.5 W Frequency response 35 Hz - 140 Hz Impedance 3 Ω Note Dimensions 190 x 410 x 309 Specifications and design are subject (W x H x D) • to change without notice. -
Page 21: Troubleshooting
• It would also be advised that the soundbar is running its latest software. You may consult the local or online Warning Philips Consumer Care for the latest software version. • Risk of electric shock. Never remove the • Please make sure TV’s audio output casing of the product. - Page 22 • Your TV may be set to variable audio Dolby Atmos output. Confirm that the audio output Cannot achieve outstanding Dolby setting is set to FIXED or STANDARD, Atmos effects. not VARIABLE. Refer to your TV’s user manual for more detailed information. •...
- Page 23 7 Trademarks Roku, the Roku logo, Roku TV, Roku TV Ready, and the Roku TV Ready logo are The Adopted Trademarks HDMI, HDMI trademarks and/or registered trademarks High-Definition Multimedia Interface, of Roku, Inc. This product is Roku TV Ready-supported in the United States, HDMI trade dress and the HDMI Logos are Canada, United Kingdom, Mexico and trademarks or registered trademarks of...
- Page 24 Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.