Messages - Sony CMT-G2NIP Operating Instructions Manual

Messages

For inquiries, be sure to make a note of the error
code (Cxxx) if one appears on the display.
Audio player
CD Over:
You have reached the end of the disc while
pressing M during playback or pause.
Data Error:
You tried to play an unplayable file on the USB
device.
Error:
The USB device could not be recognized or an
unknown device is connected.
LOCKED:
The disc tray does not open. Contact your nearest
Sony dealer.
No Device:
No USB device is connected or the connected USB
device has been stopped.
No Disc:
There is no disc in the player, or you have loaded a
disc that cannot be played.
No Memory:
The memory selected for playback has no memory
media inserted in the USB device.
No Preset (DAB/DAB+ only):
There is no stored preset station.
No Service (DAB/DAB+ only):
There is no supported DAB/DAB+ broadcast in
your country or region.
No Step:
All of the programmed tracks have been erased.
No Track:
A playable file on the USB device is not loaded in
the system.
Not in Use:
You tried to perform a specific operation under
conditions where that operation is prohibited.
Not Supported:
An unsupported USB device is connected.
OFF TIME NG!:
The Play Timer start and end times are set to the
same time.
Push STOP!:
You pressed PLAY MODE during playback.
Step Full!:
You tried to program more than 25 tracks or files
(steps).
Protect :
You tried to exceed the allowed input of the sound
level to the amplifier section. This message is
displayed along with the sound interruption when
you turn up the volume during playback of a CD
with a recording level that is too loud, or when you
play back a CD which contains input signals that
are too large.
Adjust the volume using the VOLUME or BASS/
TREBLE to turn off the message. We recommend
a volume level where the sound is not blasting out
of the speakers.
If the "PROTECT" message does not disappear,
make sure the speaker cord is connected firmly.
Network settings
Connection Error:
The system has failed to connect the network.
Input Error!:
The entered values are incorrect or invalid.
Not in Use:
An operation that is currently prohibited is being
performed.
Not Supported:
The access point device does not support the WPS-
PIN code method.
Home Network
Cannot Connect:
The system cannot be connected to the selected
server.
Cannot Get Info:
The system cannot retrieve information on the
server or contents.
67 GB