Listening To Audio Material From An External Component - Sony CMT-G2NIP Operating Instructions Manual

Listening to audio material from an
external component
You can listen to the playback audio from an
external component (such as a portable music
player, etc.) connected to the AUDIO IN 1 or
AUDIO IN 2 jack on the unit.
Use an audio connecting cable (not supplied) to
connect the AUDIO IN 1 or AUDIO IN 2 jack on
the unit and the audio output jack on the external
component.
Make sure the audio connecting cable (not
supplied) is firmly inserted into both jacks. If not,
noise may be generated in the audio output.
1
Connect additional audio
component to the AUDIO IN 1 or
AUDIO IN 2 jack on the unit using
an audio analog cord (not
supplied).
AUDIO IN 1/2 jack
2
Press VOLUME – to turn down the
volume on this system.
3
Press FUNCTION +/– repeatedly
to select the AUDIO IN 1 or AUDIO
IN 2 function.
4
Start playback of the connected
component, and adjust its volume.
Playback audio is output from the speakers of
this system. For details on the operation of
the connected component, refer to the
operating manual supplied with the
connected component.
Notes
•
Lower the volume on this system using VOLUME –
before disconnecting the external component.
•
The system may enter standby mode automatically if
the volume level of the connected component is too
low. Adjust the component's volume accordingly. See
"Turning off the automatic standby function" (page 21).
49 GB