Using The Remote; Attaching The Speaker Pads - Sony CMT-G2NIP Operating Instructions Manual

Connect the other end of the speaker cords to
the terminals on the speakers.
Black #
5
Plug the power cord into a wall
outlet.
The STANDBY indicator on the unit lights
up.
WARNING
DO NOT plug the power cord into a wall outlet until
other connections have been made.
When making a wired LAN connection
Connect a network (LAN) cable (not supplied) to
NETWORK . For details, see "Setting up a
wired network" (page 26).
18 GB

Using the remote

Remove the battery compartment lid, and insert
two R6 (size AA) batteries, E side first, matching
the polarities.
Notes on using the remote
•
With normal use, the batteries should last for about six
months.
•
Do not mix an old battery with a new one or mix
different types of batteries.
•
If you do not use the remote for a long period of time,
remove the batteries to avoid damage from battery
leakage and corrosion.
Attaching the speaker
pads
Attach the speaker pads to the bottom of the
speakers to prevent slipping.