Music Services - Sony CMT-G2NIP Operating Instructions Manual

The system cannot be turned on automatically
when accessed by devices on the network.
,
The system itself does not support the Wake-on-LAN
standard. Therefore the system cannot be turned on
by Wake-on-LAN when "Network Standby" is set to
"Off." Set "Network Standby" to "On" so that the
system can respond to operations by other devices
via a network (page 53).
Devices on the network cannot turn on the
system.
,
The system cannot be turned on with a Wake-on-
LAN start up operated by other devices on a network.
The system cannot play the track that is
currently being played by the PARTY host.
,
The PARTY host is playing a track of an audio
format that cannot be played on the system.
,
It may take a while before the playback sound is
output.
The system joins an unintended PARTY.
,
If more than one PARTY has been started when the
system joins, the system may not be able to join the
desired PARTY. Close the other PARTY, and then
join the desired PARTY.
AirPlay
The unit cannot be found from an iOS device.
,
Check your set-up of the firewall of the security
software. Refer to the website (page 60) for details.
,
Make sure the iOS device or the computer with
iTunes is connected to your home network.
,
Update the AirPlay software version of the unit and
the iOS device to the latest version (page 48).
The sound skips.
,
The sound may skip depending on factors such as the
network environment when you use a wireless
network.
,
The servers are overloaded. Close all unneeded
applications you are currently using.
This unit cannot be operated.
,
Update the software version of the iOS device to the
latest version (page 48).
,
Update the software version of the unit to the latest
version (page 48).
,
Make sure another device is not streaming to the
AirPlay compatible device at the same time.
Buttons such as N, X, x, . and > do
not work.
,
Make sure that the settings that allow iTunes to
accept control from this unit are active.
,
The system is not selected as the remote speaker on
the iOS device. Select the unit as the network
speaker.

Music Services

You cannot connect the system to a service.
,
Make sure that the wireless LAN router/access point
is turned on.
,
Check the network status. Press OPTIONS to enter
the options menu, then select "Information" –
"Connection." If "No Connection" appears, set up
the network connection again (page 22).
,
When the system is connected through a wireless
network, move the unit and the wireless LAN router/
access point closer to each other and do the setup
again.
,
If your contract with your Internet provider limits
Internet connection to one device at a time, this
device will not be able to access the Internet when
another device is already connected. Consult your
carrier or service provider.
The sound skips.
,
The bandwidth of your wireless LAN may be too
low. Move the unit and the wireless LAN router/
access point closer to each other, without any
obstacles between.
65 GB