Advertisement
Sensepoint Plus, Sensepoint Pro, Series 3000 XPIS and Sensepoint XCD Duct Mounting Kit
Mounting the Detector Assembly to the Duct Assembly
1
Place the Detector Assembly onto the Duct Assembly Retaining Plate fitted to the duct.
2
Clamp the Detector Assembly down.
Use the 4 x M6 hex head securing screws to firmly secure the Detector Mounting Plate to the
Duct Assembly.
3
Cap off the external gas inlet port on the top of the Mounting Plate until needed.
NOTE THAT THE DETECTOR
SHOWN IS SENSEPOINT PRO
SENSEPOINT PLUS, SERIES 3000
XPIS AND SENSEPOINT XCD FIT
IN EXACTLY THE SAME WAY
5
Issue 3 07/2009
MAN0639
Advertisement
