GE EX30014 User Manual

User's Guide
Model: EX30014
SPEAKERPHONE WITH CALL WAITING/CALLER ID
visit our website
www.thehomephones.com
Model EX30014
Parts checklist
All manuals and user guides at all-guides.com
Your telephone package includes the items shown below.
Telephone Jack Requirements
To use this phone, you need an RJ11C type modular telephone
jack installed on your line. If you do not have
a modular jack, call your telephone service
provider to find out how to have one installed.
If you have DSL high speed Internet service,
a DSL filter is required (not included). Contact
your DSL service provider for more information
about DSL filters.
Installing or replacing batteries
IMPORTANT: The caller ID records and memory location records will
be lost approximately 90 seconds after the batteries are removed
from the telephone. Please read the instructions before replacing
the batteries and have the batteries ready for replacement.
Your telephone uses 4 AA-size alkaline batteries for receiving
and storing caller ID records and for storing the numbers you
use for memory dialing, pulse dialing, and redial.
1. Turn the telephone base over, and detach the mounting
2. Press on the tab to open the battery compartment cover
3. Replace the mounting bracket to the telephone base with
CAUTION: If the telephone will not be used for an extended period of
time, remove the batteries from the base to prevent possible leakage.
is a trademark of
CALL WAI T I N G
LOW
Telephone base
with mounting
bracket attached
Telephone
line cord
bracket by pressing on the top of the bracket.
on the back of the base. Insert 4 AA alkaline batteries (not
included) into the compartment matching the engraving in
the battery compartment as shown.
the engraved texts "THIS END UP FOR DESK USE" correctly
oriented.
Handset
Handset
coiled cord
User's Guide
Model: EX30014
SPEAKERPHONE WITH CALL WAITING/CALLER ID
User's guide
1
Wall plate
Modular
telephone
jack